ICE Debugger

Per le sue caratteristiche, PEEDI è la soluzione ottimale per il debugging hardware di schede con interfaccia JTAG.
Molto veloce, economico, e performante è l'abbinamento ideale per il sistema KaeilOS linux embedded, PEEDI fornisce anche funzionalità di Flash programmer (anche NAND).

KOAN distribuisce e supportaPEEDI il debugger hardware JTAG di Ronetix.

PEEDI ICE debugger

supporto tecnico disponibile a pagamento

PEEDI is an EmbeddedICE solution that enables you to debug software running on ARM, PowerPC and ColdFire processor cores via the JTAG/BDM port. PEEDI provides the services needed to perform all debugging operations.


  • Linux Kernel debugging also when MMU is enabled
  • uClinux support - enables debugging of kernel and applications
  • Access to all CP15 registers - physical or interpreted mode
  • Low cost: The combination of free compiler (gcc), free debugger (gdb, insight) and PEEDI.
  • Target Reset control and remote reset detection
  • Hardware and Software Breakpoints
  • download images from TFTP, FTP, HTTP server or MMC/SDcard
  • telnet command line interface
  • serial command line interface
  • front panel interface: 2 buttons and 7-segment LED
  • can be used as Standalone FLASH programmer without host - the file images are stored on MMC/SD card and controlled via front panel interface
  • up to 15 file images can be selected on the front panel
  • support of various chip vendors: AMD, Intel, Atmel, Toshiba,SST, SGS and others. The built-in FLASH chip database contains information of more than 800 chips as well as Atmel AT91SAM7, Philips LPC2000, Freescale MAC7100, MPC5500, MCF52XX, TI TMS470, ST STR7, ST STR9 - see supported flash devices
  • Programming of Atmel AT45DB SPI DataFlash connected to an AT91 MCU - enables the easy use of AT45DB SPI DataFlash as a boot device
  • NAND Flash programming - MCU independent
  • NAND FLASH JFFS2 support
  • auto FLASH program after target power detect
  • multi FLASH support - up 4 devices per core
  • built-in speaker
  • ideal for small and mid-range manufacturing
  • Built-in telnet server for FLASH programming and debug services
  • Automatic processor initialization on power-up and Reset
  • RS232 serial interface for setup
  • Ability to route the RS232 of the PEEDI to a TCP/IP port
  • Ability to route the ARM7/ARM9 DCC to a TCP/IP port
  • Warranty: Hardware 2 Years; Software 1 Year


Periferiche supportate

Tutte le cpu ARM7, ARM9, XScale, PowerPC e ColdFire based


• ARM7TDMI, ARM710T, ARM720T, ARM740T, AT91SAM7, LPC2000, MAC7100, STR7, TMS470, ARM920T, ARM922T, ARM926EJS, ARM940T, ARM9E, ARM946E, ARM966ES, STR9


• PXA250, PXA255, PXA270, PXA800, 80200, 80219, 80321, IXP420, IXP421, IXP422, IXP425, IXP460, IXP465, IOP303, IOP310, IOP315, IOP321, IOP332, IOP333.


• PowerPC: MPC5534, MPC5553, MPC5554, MPC5565, MPC5566, MPC5567


Debugger supportati

  • Open source: gdb, insight, ddd, Kdbg, Eclipse IDE
  • Commerciali: ARM, ADS, ARM RealView, Green Hills MULTI, IAR C-SPY, eCosPro

Built in FLASH programmer:

  • download di immagini firmware da TFTP, FTP, HTTP server o MMC/SDcard
  • interfaccia Telnet a linea di comando
  • interfaccia pannello frontale: 2 bottoni e display 7-segmenti
  • funzionamento standalone FLASH programmer senza PC i file da programmare sono memorizzati su MMC/SD card ed il controllo avviene attraverso il pannello frontale

Supporto Multi Core

Con un solo debugger si possono controllare fino a 4 dispositivi (richiede licenze aggiuntive)