PEEDI hardware JTAG debugger

Thanks to its features, PEEDI is the optimal solution for JTAG hardware debugging.
Extremely fast, cheap, is the ideal boundle for KaeilOS linux embedded, it includes Flash programmer fatures (also NAND flash).

KOAN distributes and supports* Ronetix' hardware debugger PEEDI .

* extra charged

PEEDI is an EmbeddedICE solution that enables you to debug software running on ARM, PowerPC and ColdFire processor cores via the JTAG/BDM port. PEEDI provides the services needed to perform all debugging operations.

Features

• Linux Kernel debugging also when MMU is enabled
• uClinux support - enables debugging of kernel and applications
• Access to all CP15 registers - physical or interpreted mode
• Low cost: The combination of free compiler (gcc), free debugger (gdb, insight) and PEEDI.
• Target Reset control and remote reset detection
• Hardware and Software Breakpoints

• download images from TFTP, FTP, HTTP server or MMC/SDcard
• telnet command line interface
• serial command line interface
• front panel interface: 2 buttons and 7-segment LED
• can be used as Standalone FLASH programmer without host - the file images are stored on MMC/SD card and controlled via front panel interface
• up to 15 file images can be selected on the front panel
• support of various chip vendors: AMD, Intel, Atmel, Toshiba,SST, SGS and others. The built-in FLASH chip database contains information of more than 800 chips as well as Atmel AT91SAM7, Philips LPC2000, Freescale MAC7100, MPC5500, MCF52XX, TI TMS470, ST STR7, ST STR9 - see supported flash devices
• Programming of Atmel AT45DB SPI DataFlash connected to an AT91 MCU - enables the easy use of AT45DB SPI DataFlash as a boot device

• NAND Flash programming - MCU independent
• NAND FLASH JFFS2 support
• auto FLASH program after target power detect
• multi FLASH support - up 4 devices per core
• built-in speaker
• ideal for small and mid-range manufacturing
• Built-in telnet server for FLASH programming and debug services
• Automatic processor initialization on power-up and Reset
• RS232 serial interface for setup
• Ability to route the RS232 of the PEEDI to a TCP/IP port
• Ability to route the ARM7/ARM9 DCC to a TCP/IP port
• Warranty: Hardware 2 Years; Software 1 Year

 

Supported boards

Tutte le cpu ARM7, ARM9, XScale, PowerPC e ColdFire based

ARM7/ARM9

• ARM7TDMI, ARM710T, ARM720T, ARM740T, AT91SAM7, LPC2000, MAC7100, STR7, TMS470, ARM920T, ARM922T, ARM926EJS, ARM940T, ARM9E, ARM946E, ARM966ES, STR9

PXA/Xscale

• PXA250, PXA255, PXA270, PXA800, 80200, 80219, 80321, IXP420, IXP421, IXP422, IXP425, IXP460, IXP465, IOP303, IOP310, IOP315, IOP321, IOP332, IOP333.

PowerPC/ColdFire

• PowerPC: MPC5534, MPC5553, MPC5554, MPC5565, MPC5566, MPC5567
• COLDFIRE: MCF52XX, MCF53XX, MCF54XX

 

Supported debuggers

• Open source: gdb, insight, ddd, Kdbg, Eclipse IDE
• Commerciali: ARM, ADS, ARM RealView, Green Hills MULTI, IAR C-SPY, eCosPro

Built in FLASH programmer:

• download images from TFTP, FTP, HTTP server or MMC/SDcard
• telnet command line interface
• serial command line interface
• front panel interface: 2 buttons and 7-segment LED
• can be used as Standalone FLASH programmer without host - the file images are stored on MMC/SD card and controlled via front panel interface
• up to 15 file images can be selected on the front panel

 

Multi Core support

Multi Core support (extra license is required) an adapter controls automatically up to 4 target boards